TurnItOff_OnAgain@lemmy.world to Mildly Interesting@lemmy.worldEnglish · 2 years agothis plug doesn't have the little holeslemmy.worldimagemessage-square119fedilinkarrow-up1280arrow-down130
arrow-up1250arrow-down1imagethis plug doesn't have the little holeslemmy.worldTurnItOff_OnAgain@lemmy.world to Mildly Interesting@lemmy.worldEnglish · 2 years agomessage-square119fedilink
minus-squarethis_1_is_mine@lemmy.worldlinkfedilinkarrow-up3arrow-down4·edit-22 years agoUSA plug should be flipped. The ground should be on top.
minus-squareprayer@sh.itjust.workslinkfedilinkarrow-up3·2 years agoNot really. Most plugs I see have ground at the bottom and there’s no official standard for orientation.
minus-squareZorg@lemmings.worldlinkfedilinkarrow-up3·2 years agoYes, except all bulky plugs are designed for plugging into an outlet with the ground at the bottom.
minus-squareblazeknave@lemmy.worldlinkfedilinkarrow-up2·2 years agoNo. Ground is on the bottom. Almost always. Unless it’s sideways.
minus-squarepythonoob@programming.devlinkfedilinkarrow-up1·2 years agoThen just take it out and flip it around. It’s not hard. Just turn off the the circuit at the junction box first.
USA plug should be flipped. The ground should be on top.
Not really. Most plugs I see have ground at the bottom and there’s no official standard for orientation.
Yes, except all bulky plugs are designed for plugging into an outlet with the ground at the bottom.
No. Ground is on the bottom. Almost always. Unless it’s sideways.
Then just take it out and flip it around. It’s not hard. Just turn off the the circuit at the junction box first.