- cross-posted to:
- lemmyshitpost@lemmy.world
- cross-posted to:
- lemmyshitpost@lemmy.world
cross-posted from: https://lemmy.world/post/51384501
You must log in or # to comment.
Yet when I need one I never find it.
I am in this picture, and I’m… Okay with it.
Saw the short end off so you can chuck it in a drill and assemble your coffee table 3 times faster.
Or, just get a proper set of hexadrives. And torx.
Who owns a drill and a saw, but not a simple set of bits? I’ve never encountered a screw from Ikea that couldn’t be handled by a standard bit. It’s all Philips head and hex and only in like four sizes over all furniture.
Also a drill isn’t really good for this. You’re quite likely to cause damage. Use an impact driver if you have one. Or if you get a small electric screwdriver, it’s more than worth the cost when you use it on a single ikea build.
No. Really do this. It’s fantastic. I’ve converted around five different sizes and it comes in really handy.
I might need it! (Never uses any of them)
I have 2 or 3 that I did need multiple times. One to adjust the strength in my monitor arms, one to assemble and disassemble my chair, probably more I can’t remember.
