Today, I washed my hands at the kitchen sink while making lunch, and was unexpectedly chastised by my partner because she had just started the dishwasher. Apparently, she has recently come across something that has convinced her that running the hot water in your sink means the water that enters your dishwasher will be hotter (checks out), and thus the dishes will be cleaner. I tried searching startpage to see if this is real, but I couldn’t make it through even one llm-slop-ticle about it before my eyes rolled back into my head, so here I am asking y’all: chat, is this real? Doesn’t my dishwasher have a heating element? Is there any meaningful difference between heating the water with a hot water heater vs a dishwasher, other than I can’t use my sink while the dishwasher is filling and I have to pour a bunch of cool water down the drain?
Edit: okeedokee I’m wrong.
GE Appliances: Dishwasher - Correct Water Temperature
Ummm…what are all the USA people in here talking about?
I’ve installed and replaced my own dishwashers 4 or 5 times over the years and helped friends and family members many times. They only last about 5-7 years so it happens often enough for it to be routine for me.
The water supply is connected to the cold water. The dishwasher has it’s own heating element. It heats the water to “sanitizing” levels. There’s even a sanitize button.
That water gets so hot that I can’t open the door mid-cycle with my reading glasses or they’ll get completely fogged up.
The sanitize button is not a new development…
They have 120 volt electricity, it can’t heat quickly enough, so the wash cycle will begin with less than optimal temperature and take a while to get to sanitizing temperature.
So they feed it water from the hot water tank, which isn’t hot enough usually but the heating element can get it up to temp much faster at 120v.
They aren’t all designed to connect to your cold water line. In fact, most seem to specifically instruct you to connect to your hot water intake. You are right that most in the US have water heaters, but that doesn’t mean that the machine’s cycles will heat the water effectively for the full duration of the wash.
Maytag, Whirlpool, GE, and LG all recommend you connect to hotwater. Bosch (EDIT: Spelled this like the drug company not the appliance company) recommends cold. Depending on your machines cycles as well, the heating element may not get the water hot enough to make effective use of the pre-wash cycle. If your machine is connected to the hot water line and you purge the cold water from the line, you will see a more effective pre-wash (and thus more effective wash) than if you let it run cold.
North America vs Europe, North America cannot heat the water fast enough due to the limit of being on a 120V and 15 A circuit.
Not USA but North America and we ours is hooked to hot water. Has to do with having a shitty heating element since they wanted it to be plugged into 120 15A circuit.
You probably have higher voltage and more power going to that heating element, so the cold water line is fine. In the US, the heating elements in our dishwasher can’t draw enough power for cold water, so it needs to start with hot water.
Also, 5-7 years is… Pretty bad. It’s not uncommon for dishwashers to last multiple decades here. I’m pretty sure mine is at least 20 years old (and ugly lol)
I run the dishwasher every night, even if there’s just a few dirty dishes, so I’m pretty hard on my dishwasher. I use the heck out of it.
It’s caused lots of wailing and gnashing of teeth in my family but I can’t stand unloading a dishwasher packed to the gills with a week’s worth of clean dishes. Just get it done as part of a daily routine.
I checked under my cabinet just recently, and the dishwasher is indisputably connected to the hot water line.
It was like this in the last place, too, and my sibling’s place.