On May 26, a user on HP’s support forums reported that a forced, automatic BIOS update had bricked their HP ProBook 455 G7 into an unusable state. Subsequently, other users have joined the thread to sound off about experiencing the same issue.

This common knowledge regarding BIOS software would, then, seem to make automatic, forced BIOS updates a real issue, even if it weren’t breaking anything. Allowing the user to manually install and prepare their systems for a BIOS update is key to preventing issues like this.

At the time of writing, HP has made no official comment on the matter — and since this battery update was forced on laptops originally released in 2020, this issue has also bricked hardware outside of the warranty window, when previously users could simply send in the laptop for a free repair.

Overall, this isn’t a very good look for HP, particularly its BIOS update practices. The fragility of BIOS software should have tipped off the powers at be at HP about the lack of foresight in this release model, and now we’re seeing it in full force with forced, bugged BIOS updates that kill laptops.

    • Omega_Jimes@lemmy.ca
      link
      fedilink
      English
      arrow-up
      8
      ·
      6 months ago

      They’re very inconsistent. I’ve had an x360 since 2020 and, aside from the hinge being weak, it’s still going. I’m also pretty careless with my equipment. My wife uses it now.

      But then, I’ve seen more than one like yours that has seemed to evaporate like a cheap t-shirt.

      • spaghettiwestern@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        HP has known the hinges are defective since they introduced them. There are so many people having problems a class action suit was filed about it.

        • Yuri addict@ani.social
          link
          fedilink
          English
          arrow-up
          3
          ·
          6 months ago

          Hp means Hinge problem as every single one of their laptops have some problem with their hinges

      • terminhell@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Check the torq of the hinge screws. They tend to come loose over time and can rock a little. This can cause the plastic to break that holds the female standoffs that it attaches too.

      • michael_palmer@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        I have an HP 530 from 2007, and its hinges are fine. I upgraded it to 2 GB of RAM (I have core2duo model) and installed Linux Mint. I use it at work to open the corporate web portal and watch youtube, which is only possible with a modern web browser.

    • andros_rex@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      6 months ago

      They don’t play well with Linux. Occasionally my HP laptop will turn back on SecureBoot with no warning. There’s also like a full minute of delay between opening the thing and keyboard strokes registering. (Iirc, HP is so Linux hostile it’s not really supported by Arch)

      • Anti_Iridium@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Mine will start immediately after shutting down. I have never found a solution other than holding the power button

      • spaghettiwestern@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Must depend on the model. I’ve been running Mint on that (repaired) X360 for years without significant problems outside crappy Realtek wireless module issues.

    • axo@feddit.de
      link
      fedilink
      English
      arrow-up
      3
      ·
      6 months ago

      That problem has every consumer laptop. Lenovos Ideapads and Thinkbooks do the same. As well as the Asus, Acer, etc notebooks from the cheaper end.

      I do those hinge repairs from time to time for customers and its rarely a thinkpad, elitebooks, probook, etc.

    • terminhell@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      If it’s not a touchscreen, it’s fairly easy to repair. Still shouldn’t have broke in the first place, but it’s just the back panel cover.

      I’ve repaired hundreds of laptops across multiple vendors on all kinds of damage, fwiw.

      • Aux@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Touchscreens are also easy to repair, they just have two more wires in the ribbon, that’s all.

          • Aux@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            6 months ago

            Yeah, agree. But it doesn’t have to be that way. Some companies are just lazy, sadly.

            • terminhell@lemmy.dbzer0.com
              link
              fedilink
              English
              arrow-up
              1
              ·
              5 months ago

              There’s been a few models I’ve tried repairing in the field, and it would have required a likely damaging of the end of the WiFi antenna wires (at the very least). Some will have this effectively thick copper tape that’s soldered onto the end of the WiFi wires, and the glue is very aggressive.

              And again, some you can peel off without too much trouble, but some not as easily. Granted the vast majority of my repairs were onsite at the customers home/business.