This; works on Mull; there is no submit button, it just constantly refreshes the results and thus is slow AF from continuously juggling the data.

Run the VPN right from the device itself, allowing for DNS blocking of whatever you want. Previously, Blokada was used, now Rethink DNS is preferred.

He’s still in it for the fascist coup.

Employees can daily clean as much of the machine as they can access, and there will still be a bit of black biofilm in there (not mold). The same biofilm lives down in all of your sink drains.

I was recommended by a well-known privacy guide to use Rethink with AhaDNS Blitz, but it seems to fail often; nothing resolves until the VPN is stopped and restarted. Any ideas or advice?

Maybe they’ve finally fixed those problems. In Lakka, I set my controller up once (for each unique controller) in RetroArch frontend, and then it works in any emulator core. I don’t think it’s normal to have to set up the controller in each core (but you can, if you want or need to!)

EmuDeck uses EmulationStation, in which I’ve seen a lot of controller-related problems. Controllers working in the menu but not in the emulators. Controllers working in the emulators but not in the menus.

For a dedicated emulation machine, I’ll once again shill for Lakka, that boots LibreELEC directly into RetroArch without EmulationStation, and has bootable installers for multiple configurations of x86_64 machines and images for loads of single-board computers.

Lots of arcade games and other amusement machines made in the last twenty years run on desktop Linux.

Incredible Technologies games, Raw Thrills/Play Mechanix Big Buck Hunter Pro, Arachnid dartboards, and TouchTunes jukeboxes off the top of my head.

Sorry. If there is a keyboard key or other input event to scroll it, you could set a touchscreen gesture to emulate that input?

This trope is false; frogs will attempt to escape when the water gets unpleasantly hot. They don’t allow themselves to be boiled.

Just saying.

Does double tap and drag work?

Meaning: tap, lift, tap without lifting, drag.

Man, if you thought 1998 had too many expansions…

Wizards of the Coast was bought by Hasbro in 1999, but only in the last five years or so have they really seemed to open the floodgates with all the Hasbro and other IP crossovers, multiple versions of every card, etc. It’s not surprising since other toy sales seem to be in a slump, but it’s wild that Magic is keeping one of the world’s largest toy companies in the black.

You are correct.

One can solder in a temporary “helper battery” (or 3V power supply) to the same traces but in a different spot, to keep the SRAM alive while the real battery is replaced.

Some later games (GBA-era) use Flash memory and the battery is just for the clock.

Japan also got Game Boy Light, which is a Game Boy Pocket with green EL backlighting (like Indiglo).

I have a similar PATA enclosure. I thought it was cursed until I got to reuse the A-A cable to upload FlashFloppy custom firmware to Gotek floppy emulators without wiring up a USB-serial adaptor.

It works for Ultimate Boot CD, which includes DBAN and a lot of other fun stuff.

I play with retro hardware and Ventoy has also worked for me with some weird old isos that even Rufus didn’t work with (XP/Server 2003 multidisc from eXPerience that uses a Linux bootloader?)

Don’t you want to be able to see the 50 or 60Hz flicker of the lights?

Samples were used on older versions of MAME before the custom audio generators were emulated. They can be found at samples.mameworld.info and would go in the “samples/bosco” directory.

This, I tried some newer distros with Wayland and ended up going back to Debian Stable and X11 for gaming. Got Sunshine (for Moonlight handheld client streaming) working for in about a minute.

Lakka will make a dedicated RetroArch machine, if that’s your thing.

Edit: Updated link for Lakka x86.