Ohhhhhhh buddy you activated my trap card. I happen to have multiple type ratings, and I still consider myself far from an expert. However I do still hold a CFI so I’m going to try to teach you some stuff!

Every airplane that I’ve been required to have a type rating for has a radar altimeter. A lot of systems already use that information, from auto landings, to caution message inhibits, down to GLD spoilers. Watch any “landing an airliner” YouTube videos, I feel pretty safe in saying generally you will hear an audible “50, 40, 30, 20, 10”, that information is usually derived from the radar altimeter.

While you are correct, there are emergency checklists that do require engine shutdowns, there are very few that would require that to be done weight off wheels and under 1000ft AGL. Off the top of my head, the ditching (landing in water) checklist would, but that could be tied to a ditching switch, if equipped, which since I don’t have a 787 type, I don’t know if it does, but I would guess it probably does.

Seeing as you know what a pitot tube is I’m going to assume you at least have some interest in flying. The pitot tube is used for airspeed, what you’re probably thinking of is the other part of that system called the static port. That’s used for things like altitude and vertical speed.

Circling back to my “simple fix”, my current airframe has triple redundant hydraulics with dual redundant pumps for each. So for something that has that much redundancy, don’t you think something as critical as an engine should require more than one switch to shutdown, at least at an altitude of high vulnerability? Just food for thought.